+- Spiffy Hacks (https://spiffyhacks.harmonypogo.com)
+-- Forum: Vtech InnoTab (https://spiffyhacks.harmonypogo.com/forum-1.html)
+--- Forum: General Info, FAQ and Downloads (https://spiffyhacks.harmonypogo.com/forum-15.html)
+--- Thread: Unit EID Info (/thread-462.html)
Unit EID Info - Deak Phreak - 01-07-2015
Just some snippets while talking with mick so I can look into this further for the Innotab 2s when I get some time.
<is0-mick> the EID
<is0-mick> there's two ways
<is0-mick> either use the way they do it with the /dev/app/ blahblah and ioctls
<is0-mick> then md5 the data
<is0-mick> or..
<is0-mick> you can just read it direct from flash
<is0-mick> then md5 it
<is0-mick> and you'd have the eid
<is0-mick> maybe need a script and a couple of tools
<is0-mick> or write a prog
<is0-mick> the ID is like a long ascii ID
<is0-mick> ZF45BSAKKSSEDCVGOWWDAMVODEESLDRTEGSS
<is0-mick> type thing
<is0-mick> and the EID
<is0-mick> is the MD5 of that
<is0-mick> so you'd need to read it from sdcarda3? i think
<is0-mick> actually
<is0-mick> dd would do it
<is0-mick> dd if = /dev/sdcarda3 offset length
<is0-mick> or whatever
<is0-mick> output that to a file called ID
<is0-mick> then MD5 that
<is0-mick> gives you EID