08-21-2014, 08:25 AM
That is correct, you will simply FTP / telnet into the device and delete the developer flag. When it reboots, it should be out of developer mode. I don't believe there is any other way to disable developer mode unless you have a hardware shell access via a serial cable. You should always be able to FTP into the device though when it is in developer mode. The LeapPad manager will not work when in developer mode so you have to use FTP. It would be great if I can figure out a way to have it connect via FTP as well, but you would still most likely have to set up the IP info correctly before it can do that.