10-18-2015, 05:16 AM
Hi All,
I bricked storio 3 system.
I applied tuto above with cable and TX RX connection
I succeed to get terminal session.
I followed the procedure to until "app_destroyer.x -f" command
But now, when I restart the system, it's still bricked
and it's impossible to get terminal session by type 1021.
I have this message :
Do someone have an idea of the problem
Thx so much
I bricked storio 3 system.
I applied tuto above with cable and TX RX connection
I succeed to get terminal session.
I followed the procedure to until "app_destroyer.x -f" command
But now, when I restart the system, it's still bricked
and it's impossible to get terminal session by type 1021.I have this message :
Code:
Cmd = 0x7007, SD_STATUS = 0x1304
FastBoot Image address(0xF99D)
Set FastBootTag(0xB200FF00)=0x54534146
LD: part_num=1, run_addr=0x00100000, start=257(sector), size=512(sector)
Cmd = 0x7007, SD_STATUS = 0x1304
Jump to eMMC_LD Code, Addr=0x00100000
###### eMMC_LD VERSION: (Apr 24 2014 11:11:29) ######
pBoardVersion(0xB1007F78) = 0xB4B4B4B4, pBootFlag(0xB1007F7C) = 0xA55A7887
voltage=04.47
Set SDC Clock: 10 MHz
DISPLAY BUFFER = 0x03E00000, (kernel)
voltage=05.07
set PWM duty = 0
rtc (0x00) = 5
rtc (0x02) = A3
get rtc alarm second value = 0
alarm value false, set value = 32
voltage=05.06
logo: start=34201, size=2208 (sector), buffer=0x03E80000
set PWM duty = 75
bright:75
audio: start=36409, size=864 (sector), buffer=0x03F94000
voltage=04.96
interval=45, frame=22, clk_div=1, fps=41, ms_pf=48
audio_start_num=8
Earphone remove
volume:9
voltage=04.96
send i2c dummy clk
*0x90005144 = 0x00000001
*0x90005080 = 0x00C0A22A
*0x9000A024 = 0xFFFFFFD7
*0x90005110 = 0x3FEB0000
*0x90005118 = 0x3FEB00FF
*0x9000511c = 0x03EB0000
*0x90005114 = 0x00030000
jump to fast bin, addr = 0xB2000000
<<<FastBin start>>>
[ 18.010000] [snapshot_sd] wait for TFT0 v-blank...done! enable clock.
[ 18.010000] [snapshot_sd] enable TFT1 clock.
[ 18.010000] GPL32900 system timer init, PCLK(arm_apb)[90000000]Prescaler[89]LDR[10000]
[ 18.010000] resume:gp_sdcard_cardinit
[ 18.010000] ### eMMC 4-bit high speed mode
[ 18.010000] ### eMMC speed = 0x190 (40 MHz)
[ 18.010000] Restarting tasks ... done.
System_F[ 18.090000] >>> ceva_clock_enable(1)
ork("sna[ 18.100000] === CEVA CLOCK REGS ===
pshot_ut[ 18.100000] scuaReg->scuaPeriClkEn2 = 22000003
il.x") r[ 18.110000] scucReg->scucPeriClkEn = 0704B894
eturns 0[ 18.110000] scucReg->scucCevaCntEn = 00000007
[ 18.200000] >>> ceva_clock_enable(0)
[ 18.200000] === CEVA CLOCK REGS ===
[ 18.200000] scuaReg->scuaPeriClkEn2 = 22000001
[ 18.230000] scucReg->scucPeriClkEn = 0104B890
[ 18.230000] scucReg->scucCevaCntEn = 00000000
Inno_Logo: close ceva clock.
System_Fork("/sbin/innologo_opt /tmp/innologo_options")
sdmount.sh: Enter /etc/sdmount.sh ACTION=remove, mmc_name=sdcardb1, SEQNUM=399, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=remove, mmc_name=sdcardb, SEQNUM=401, vtechBootDev=eMMC
UCountryLang=FRfre
innologo_opt /tmp/innologo_options
[ 18.880000] ### SD limit clock = 0x190(40MHz)###
[ 18.900000] sdcardb: sdcardb1
innologo_opt: Storio3(R)
innologo_opt: reverse left/right channel in audio mixer
System_Fork("/sbin/innologo_opt /tmp/innologo_options") returns 0
Inno_Logo: Parsing String 'offadc=291'...
Inno_Logo: command line parameter: auto off at ADC value 291
Inno_Logo: Parsing String 'version=1578sr'...
Inno_Logo: command line parameter: hardware version = 1578 (Storio 3 (R))
Inno_Logo: Parsing String 'revch'...
Inno_Logo: command line parameter: reverse audio mixer channels
System_Fork("rm -f /tmp/innologo_options")
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcardb, SEQNUM=402, vtechBootDev=eMMC
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcardb1, SEQNUM=403, vtechBootDev=eMMC
sdcardb: Do not mount any partition before snapshot!
sdcardb1: Do not mount any partition before snapshot!
System_F[ 19.530000] ##### register_disp_irq_func(): SEQ:3 ARG=2 #####
ork("rm -f /tmp/innologo_options") returns 0
Inno_Logo: Set LCD position to FLIP.
System_Fork("audiomixer.x -cs -r 48000 &")
[ 19.540000] ###### vtech_lcd_ctrl: change lcd_position FLIP ######
[ 19.540000] ##### disp_irq(): DO FLIP, SEQ:3 ARG=2 #####
System_Fork("audiomixer.x -cs -r 48000 &") returns 0
- enabling miexer swap channel
[ 19.610000] I2S = 0x10c424
- server[ 19.610000] Audio: ioctl SNDCTL_DSP_SPEED:
format:[ 19.620000] Audio: set sampling rate = 48000.
sample rate = 48000 Hz
initializing...
Inno_Logo: headphone OFF
Inno_Logo: RTC alarm time second = 0
System_Fork("devmem 0x9301F038 32 0x0000037F")
System_Fork("devmem 0x9301F038 32 0x0000037F") returns 0
InnoLogo Result: 0
===============================
===== Snapshot End ======
===============================
Inno_Logo: going background.
[ 24.110000] Entering gp_tp_probe
[ 24.140000] input: GeneralPlus touch panel controller as /devices/virtual/input/input0
[ 24.180000] gp_tp driver loaded(0)
Change t[ 24.320000] ##### register_disp_irq_func(): SEQ:4 ARG=1 #####
o orientation landscape
Bundle title mounted at /dev/sdcarda8 successfully!
+++Turn On ramzswap...
Setting up swapspace version 1, size = 67104768 bytes
UUID=b32b44c0-a9fc-4d03-a44c-120a5092900b
[ 25.090000] Adding 65528k swap on /dev/sdcarda9. Priority:150 extents:1 across:65528k SS
waiting for /dev/ramzswap0 exist...
####################################
2014-06-05 16:46:34
dev
vicsiu
####################################
sdmount.sh: Enter /etc/sdmount.sh ACTION=add, mmc_name=sdcardb, SEQNUM=, vtechBootDev=eMMC
starting pid 511, tty '': '/._.'
sdcardb: dosfsck...
[ 25.640000] ramzswap: /dev/ramzswap0 initialized: disksize_kb=8192, disktype=0
[ 25.730000] Adding 8184k swap on /dev/ramzswap0. Priority:100 extents:1 across:8184k SS
dosfsck 3.0.12, 29 Oct 2011, FAT32, LFN
Logical sector size is zero.
sdcardb: dosfsck exit 1
---
+++++++++++++++++++++++++++++++++++++++++++
++ _Run_Once
+++++++++++++++++++++++++++++++++++++++++++
SB_LOCATION=eMMC
SDCARD_PATH is: /vp_mnt/sd
Install key_driver with config=6 (IT2013 with D-Pad keys)
HEADPHONE_VOL_RATIO=80
[ 26.200000] ###watchdog_init###
[ 26.210000] input: gp-keys as /devices/platform/gp-keys/input/input1
[ 26.610000] SPU module: left/right channels swapped
[ 26.800000] [SPEAKER 27]
[ 26.800000] dac-jack: No allocate memory for wifi usb
[ 27.020000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.020000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.020000] i2c-bus: write slave device address ERROR!
[ 27.060000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.070000] i2c-bus: write slave device address ERROR!
[ 27.110000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.110000] i2c-bus: write slave device address ERROR!
[ 27.150000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.160000] i2c-bus: write slave device address ERROR!
[ 27.200000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.200000] i2c-bus: write slave device address ERROR!
[ 27.240000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.250000] i2c-bus: write slave device address ERROR!
[ 27.290000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.300000] i2c-bus: write slave device address ERROR!
[ 27.340000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.340000] i2c-bus: write slave device address ERROR!
[ 27.380000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.390000] i2c-bus: write slave device address ERROR!
[ 27.430000] [polling_delay] HAL_BUSY_WAITING Time Out!!
[ 27.430000] i2c-bus: write slave device address ERROR!Do someone have an idea of the problem
Thx so much